10/100Mbps Modular Switch for Departmental Connection

The DES-1200M is a Modular Switch with 4 open slots designed for flexible departmental connection. The Switch allows you to configure your port density and port types to fit your changing network requirements. Port density can be up to 32 10/100Mbps ports, while port types offer selections of twisted-pair copper and fiber ports, Fast Ethernet ports and Gigabit ports. With plug-and-play installation, flexible configuration and an ideal cost/performance ratio, this Switch offers a costeffective solution for the SMB or larger business to easily deploy a switching network.

4 Open Slots
The Switch comes with 4 open slots for installation of 4 modules. You install the modules by sliding them into the slots. Modules selectable include 10/100Mbps modules, Fast Ethernet fiber modules, Gigabit fiber modules and Gigabit copper modules. All modules come with their own RAM buffers and diagnostic LEDs.

Up to 32 10/100Mbps Ports
You can install up to 4 10/100Mbps modules in the Switch to get up to 32 10/100Mbps ports. Each 10/100 Mbps module comes with 8 10/100 Mbps ports. All ports auto-sense and auto-negotiate the network speeds and full/half duplex. These ports can be used to connect to workstations and print servers, each having a dedicated bandwidth.

Fast Ethernet Fiber Ports
The Fast Ethernet fiber module provides 4 fiber ports with SC connectors. These ports support full/half duplex, transfer data at 100Mbps over the single-mode or multi-mode fiber cable. They can be used to connect workstations or servers over the reliable, long-distance fiber cable.

Gigabit Fiber Ports
The Gigabit fiber module provides a 1000BASE-SX Gigabit fiber port supporting full duplex. At 2000Mbps speed, this port can be used to connect to a Gigabit server to provide large, bottleneck-free bandwidth for
simultaneous access by workstations. You can also use this module to connect the switch to the company fiber backbone.

Gigabit Over Copper Twisted-pair
The Gigabit port provides an inexpensive alternative solution to fiber-optic. Using your existing low-cost Cat. 5 copper twisted-pair wires as the transmission media, this port allows you to instantly upgrade your server to Gigabit capability without requiring you to install new, expensive fiber cables.

IEEE 802.3x Flow Control
All ports support Flow Control, allowing servers to directly connect to the Switch for fast, reliable data transfer. At full duplex, this function provides highspeed data pipes to your servers with minimum data transfer loss.

4-slot Switch Chassis
Flexible configuration for departmental connection
Up to 32 optional dual-speed Fast Ethernet ports (Cat. 5 cable)
Up to 16 optional Fast Ethernet ports (fiber cable)
Optional Gigabit fiber ports
Optional 10/100/1000Mbps Gigabit port for Cat. 5 cable
Automatic MDI cross over function for twisted pair ports
Secure store-and-forward switching scheme
Full/half-duplex for Ethernet/Fast Ethernet speeds
Blazing 2000Mbps full duplex for Gigabit ports
IEEE 802.3x Flow Control to minimize packet loss

D-Link MODULAR MEDIA SWITCH 4SLOT, Full duplex, Rack mounting

D-Link MODULAR MEDIA SWITCH 4SLOT. Full duplex. MAC address table: 12000 entries. Rack mounting